Extending the definition of The Ultimate Ride™.

One-Piece Side Frames         
        TiLite builds the Aero X with one-piece side frames.  One-piece side frames increase performance by reducing flex and increasing durability.

Tru-Fit System         
        The Aero X features TiLite’s Tru-Fit Component System - comprised of the Rigid Folding Mechanism, Adjustable Bullet Front Caster Housing and Curved Axle Plate.  Instead of bolting through frame-weakening holes, Tru-Fit System components clamp directly onto the side frames.  The Tru-Fit System eliminates one of the main stress points on today’s wheelchairs by reducing the number of holes in the frame by 50%.  In addition, the Tru-Fit System allows for infinite adjustability of its components since there is no need to line up components with pre-drilled holes. This design innovation also greatly improves the durability of the Aero X frame.

NEW “Easy-Fold” Rigid Folding Mechanism (RFM)
              TiLite’s exclusive Rigid Folding Mechanism cross tube design “RFM”, just got even better!  The new “Easy-Fold” enhancement now makes the RFM much easier to fold without sacrificing ride or comfort!
The Easy-Fold RFM’s design allows TiLite to use one-piece side frames in its newest line of folding chairs. This innovation increases performance and enhances durability because the side frames are welded together - not bolted. In addition, the Easy-Fold RFM cross tubes secure to the bottom frame tube by clamping over it. This keeps the bottom pivot point in line with the frame, allowing the chair to fold as narrowly as possible.

Snap-In Seat Saddles         
        TiLite’s RFM cross tubes also feature snap-in seat saddles that lock the cross tubes into place, helping the Aero X achieve rigid chair performance.

Adjustable Bullet Caster Housing
        TiLite’s exclusive Bullet Caster Housing was created by designing an integral frame component with two goals in mind; low weight and elegant looks.  Plus, the adjustable version of the Bullet Caster Housing found on the Aero X provides 15 degrees of forward and rearward adjustment.  This allows you to square the casters even with the most aggressive seat slopes.  Like many of TiLite’s innovations, the Bullet Caster design reduces the weight of the chair.  Sometimes simple really is better.

Curved Axle Plate         
        TiLite’s Curved Axle Plate allows for the greatest range in center of gravity adjustment and rear seat height adjustment.

Fixed or Swing Away Front End          
          The Aero X is available with either a fixed or a swing away front end. The hangers are removable when swung in or out 15 degrees from the locked position.  The swing in or out feature of the removable front hangers on the Aero X facilitates transfers in tight spots, like a restroom or a car.

Machined Camber Plugs         
        The TiLite Aero X utilizes machined plugs to create rear wheel camber. Other manufacturers use washers to create rear wheel camber. The use of machined camber plugs precisely aligns the Aero X’s rear wheels, allowing the chair to consistently track straight.

TiLite in Color?         
        The TiLite Aero X is now available in one of 17 painted frame colors.  Whether you are looking for subtle, bright, or just plain cool, now there is a TiLite look for you.  Mix and match TiLite’s frame and accessory colors on our Color Configurator.

For More Information

The versatility of the Quickie 2 is in its modular frame that adapts with you as your function, body, and environment change.  Independent, interchangeable frame components accommodate changing conditions without having to replace the entire wheelchair.

The Quickie 2 uses Q-Fit Technology to create a tight fit between components for a snug, out-of-the-box feel over the lifetime of the chair.  Living springs in the side guards and padded swing-away arms eliminate wiggle and rattling, while reversible seat saddles lock the seat rails in place for a smooth, rigid ride.

For more information

The Catalyst 4 by Ki Mobility utilizes an offset axle plate that offers rear seat height adjustability. Even though this is a K0004, it uses the same frame construction as the Catalyst 5 to provide superior performance.

Specifications

For More Information

Ki Mobility’s flagship product, the Catalyst 5, is a high-performance folding wheelchair. Constructed from 6061- T6 aircraft aluminum and weighing only 23 lbs., it offers fine adjustments of the rear axle for seat height, center of gravity, width and camber, allowing for optimum wheel positioning. A large selection of options are available to help configure a chair to meet special requirements

For More Information

A unique pediatric wheelchair specifically designed to be used with virtually any clinically prescribed seating system.  The unique contour of the Spark’s backrest increases the usable depth of the seating system by allowing the seat to move underneath the back by an extra 2". This innovative design also comes with 32 degrees of built-in angle adjustability and the ability to change the depth by 4", in 1" increments.

With its revolutionary 5th wheel, the Ki Mobility's Little Wave permits more aggressive positioning of the rear wheels, allowing and promoting midline wheel access.  The flip under footplate improves access and the easy growth makes this a chair to last.

• Durable tig-welded frame
• Comfortable nylon upholstery.
• Smooth-rolling, solid flat-free tires.
• Dual axle hemi-height adjustable.
• Available with desk length removable or full length permanent arm styles.
• Available with detachable legrest or detachable elevating legrest.
• Seat size comes in 18" w x 16" d, 16" w x 16" d, and 20-22" sizes also available.
• Lightweight and heavy duty options also available.